Post-Construction Clean Up in Calgary, AB

Expert Post-Construction Exterior Cleaning for Builders & Property Owners in Calgary

Silvertip Wash Co. is a Calgary-based exterior cleaning contractor working with home builders, property developers, apartment complexes, commercial property managers, and homeowners finishing renovation projects across Calgary and within 60 km of South Calgary. New construction is hard on exteriors. By the time the last trade crew packs up, the property has accumulated a predictable trail of problems: construction dust baked onto windows and frames, cobwebs packed into siding corners and trim, oxidation settled across exterior panels, hard-water staining clouding the glass, grime embedded from months of outdoor exposure, and gravel scattered across walkways from winter build conditions. Our post-construction exterior cleaning service is designed to restore each property to a clean, polished, move-in-ready condition from the foundation up.

We are the official exterior cleaning contractor for Cardel Homes, one of Calgary’s most established residential builders, and we bring the same standards to other builders, property managers, and developers who need a property cleaned and ready before keys change hands. Our process uses heated pressure washing systems, soft wash multi-step siding restoration, reverse osmosis purified water window cleaning, panel-by-panel hand scrubbing, and surface cleaning for driveways and walkways. These methods address every common post-construction problem thoroughly without putting brand-new siding, glass, or trim at risk.

Post-Construction Cleaning Costs in Calgary
What to Expect

Window and House Washing Rates for New Construction

Window cleaning on post-construction projects is priced at $6 per window pane per side, whether you need the outside only, the inside only, or both:

  • Exterior-only cleaning: $6 per pane
  • Interior-only cleaning: $6 per pane
  • Interior + exterior cleaning: approximately $12 per window

For commercial properties with higher window counts, volume brings rates down. Depending on property type and scale, per-pane pricing breaks out as follows:

  • Residential: $6–$7 per pane
  • Commercial: $5–$5.50 per pane
  • Large builder projects: up to approximately 40% discount due to volume work, depending on contract scope and frequency

For surface with oxidation removal, the most common service on builder turnover jobs, pricing starts around $800. Average homes cost around $1,000 depending on property size and severity of buildup, with most jobs taking 4 to 8 hours depending on property size.

What Drives the Price Up or Down on Your Specific Project

A few key factors determine where a job lands within those ranges:

  • Property Size: Square footage, window count, and total siding area affect both time and materials.
  • Building Height: Bungalows, two-story homes, three-story homes, and walkout designs each require different access approaches.
  • Level of Construction Residue: Embedded dust, heavy oxidation, or hard-water staining means additional cleaning steps and more time on site.
  • Accessibility: Trees or landscaping near windows, tight building clearances, and equipment access limitations can all affect scope.

We use a 50-foot telescopic water-fed pole that lets us complete most residential and low-rise commercial work safely from the ground, eliminating lift rental costs on the majority of projects. Exact pricing details are available upon request.

Bundle Multiple Services and Pay Less

Booking multiple services together saves money and produces cleaner results across every surface:

  • 10% Bundle Discount when you combine House Washing and Window Cleaning
  • 15% Bundle Discount when you combine House Washing, Window Cleaning, and Gutter Cleaning

The gutter inclusion matters for a practical reason: flushing gutters pushes water and debris downward, and that runoff can land on windows already cleaned. Booking all three together means each service is completed in the right sequence, with nothing re-contaminating completed work.

Ongoing Maintenance Plans and Savings for Post-Construction Properties

Post-construction cleaning is often the starting point for an ongoing exterior maintenance program, and we make it straightforward to set one up from the same conversation. For builders, property managers, and homeowners who want to protect the results of the initial clean and keep surfaces in good condition through the seasons, we offer structured service plans with built-in savings on the house washing package and bundled services:

  • Monthly plans include $150 off
  • Quarterly plans include $100 off
  • Annual plans include $50 off

If you are already investing in a full exterior clean at handover, locking in a maintenance plan at the same time is a practical way to stay ahead of buildup before it requires the same level of effort to remove.

Every Surface We Restore on a
Post-Construction Exterior

Vinyl Siding

Siding Restoration: Vinyl, Hardie Board, and Stucco

Months of outdoor exposure leave oxidation, embedded dust, and surface grime that a basic pressure rinse will not fully address. Our five-step soft wash restoration process handles every panel safely and in the right order:

1. Low-pressure heated water rinse to loosen surface debris
2. Application of oxidation-lifting detergents
3. Panel-by-panel hand scrubbing using soft brushes
4. Hot water rinse to remove loosened contaminants
5. Reverse osmosis purified water finishing rinse

Vinyl siding and Hardie board follow the same approach, though Hardie board typically requires fewer detergents. Stucco may need additional manual scrubbing in certain areas given its texture. Running heated water throughout keeps pressure low, which matters when every panel and trim piece on the property is brand new.

Post Construction Window

Windows Cleaned the Right Way, Glass to Frame to Screen

Post-construction window cleaning covers every component of the window opening, not just the glass:

  • Window glass
  • Frames
  • Sills and tops of sills
  • Screens

Our technicians agitate the glass with a soft natural hair brush, then complete the rinse with reverse osmosis purified water. Because purified water has minerals and sediment removed, it dries without leaving residue or streaks. No soaps remain on the surface after the final rinse, which means windows stay noticeably cleaner for longer.

Results typically hold for approximately two to three months depending on local weather conditions. When hard-water staining is present, a specialized soap solution is applied before the purified water rinse to lift mineral deposits and restore full glass clarity.

Concrete Sidewalks

Driveways, Walkways, and Sidewalks: Concrete Clean After Construction

Concrete surfaces around new builds collect construction dust, seasonal gravel, and embedded grime across the full project timeline. We clean all of it using heated pressure washing with surface cleaner attachments, which deliver consistent coverage across large flat areas far more efficiently than a standard wand pass. Oil stains are treated separately with commercial stain removers and scrubbing.

We are straightforward about one limitation: oil stains can often be significantly improved, but complete removal depends on how long the stain has been sitting and how deeply it has penetrated the concrete.

Pressure Washing and Window Cleaning Calgary

Deck Cleaning Matched to the Material

Wood and composite decks are cleaned panel by panel with controlled pressure direction to avoid raising grain or damaging board edges. Vinyl decks are cleaned with a surface cleaner attachment for consistent, even coverage. If heavy furniture needs to move to give us proper access, our crew can assist with that when we arrive.

Why Calgary Builders and Property Managers Hire Silvertip Wash Co.

list

On the Approved Contractor List for Cardel Homes

We hold the exterior cleaning contract for Cardel Homes, one of Calgary’s most active residential builders, and work alongside other builders and property managers on apartment complexes, commercial buildings, and multi-unit handovers. That work has been earned by showing up on schedule, completing jobs to spec, and delivering results that hold up on a pre-handover walkthrough.

hot water

Hot Water Pressure Systems That Do More With Less Pressure

Our equipment runs on a gas-powered heated pressure washing system with a diesel heater. Hot water breaks down oxidation and post-construction grime more effectively than cold water at the same nozzle setting, which means we can reduce pressure and still produce a better result, significantly lowering the risk of damage to newly installed siding.

scrubs

We Scrub Every Panel. Most Crews Just Rinse.

Most exterior cleaning contractors apply detergent, let it dwell, and rinse. We go further. Every panel is hand scrubbed using a water-fed pole with soft brushes, and that physical agitation lifts embedded construction dust and oxidation that chemical dwell alone will not fully release. The result is a more thorough and consistent finish across the full exterior surface.

truck (1)

Uniformed Crews, Branded Trucks, and Seven-Point Communication

Every crew arrives uniformed, in a branded vehicle, with professional equipment. We hold ourselves to a seven-touchpoint communication standard running from booking through completion and follow-up. If we finish a job with time left on site, we find something useful to do and let the client know. Property managers coordinating multiple trades notice quickly when a contractor communicates proactively without being chased.

pressure

Responsible Cleaning on Every Job Site

For window cleaning, our reverse osmosis system uses ultra-purified water with no chemical residues left on the glass. For exterior washing, we use products safe for landscaping and pets. We water down nearby plants before washing begins and again once washing is complete to flush out any residue that may have settled during the job.

Book Your Post-Construction Cleaning Service in Calgary Now!

Our Step by Step
Post-Construction Cleaning Process

Getting in Touch and Booking an On-Site Quote

Everything starts with an inquiry through our website or a direct call. We ask a few qualifying questions about the property type and current condition, then arrange an in-person site visit before providing a quote. Oxidation levels, hard-water staining, and construction residue vary too much between sites to price accurately without seeing the property.

1

Confirmed Scheduling Through Jobber

Once a quote is accepted, we manage scheduling through Jobber. You receive an appointment confirmation, a day-before reminder, and any preparation instructions before the visit. If items need to be cleared from window or siding access areas, we let you know in advance so there are no holdups on the day.

2

On-Site Arrival and Safety Zone Setup

Cones go around the work area, equipment is positioned to avoid hazards, and ladders are set carefully before any cleaning begins. On commercial sites and apartment complexes with active foot traffic, we take additional steps to mark off work zones and keep tenants, customers, and remaining site personnel clear throughout the job.

3

Exterior Washing and Full Siding Restoration

Exterior cleaning runs the full five-step process: heated low-pressure rinse, oxidation-removing detergents, panel-by-panel hand scrubbing, hot water rinse, and a reverse osmosis purified water finishing rinse. Concrete surfaces are treated with heated pressure washing and surface cleaner attachments. Decks are cleaned according to their material type.

4

Streak-Free Window Detailing with Purified Water

With exterior surfaces done, we move to windows. Every window receives frame cleaning, sill cleaning, screen cleaning, and glass agitation with a soft natural hair brush before the final purified water rinse, which dries streak-free and leaves no soap film remaining on the glass.

5

Property Walkthrough, Invoice, and Referral Cards

We walk the property with you so you can inspect the finished work before we leave the site. Once you are satisfied, the invoice goes out and we leave you with referral cards and any applicable service coupons.

6

Four-to-Five-Day Follow-Up Satisfaction Check

We call every client four to five days after the job to confirm everything still looks right and nothing has come up since we left. If anything needs attention, we address it. That call is also a natural time to discuss what regular exterior maintenance might look like for the property going forward.

7
8
9
10
11

Our Satisfaction Guarantee, Insurance, and What Happens If Something Is Not Right

Every post-construction clean is backed by a 100% satisfaction guarantee, supported by an end-of-service walkthrough inspection, a follow-up call four to five days later, and professional resolution if anything comes up after we leave.

You walk the property with us before we go, not after the invoice is already sent. We carry over $2 million in insurance coverage, which matters for builders, property developers, and commercial property managers with liability exposure on active project sites. If you need a certificate of insurance before booking, we can provide one.

What Our Customers Are Saying

Frequently Asked Questions

Yes. Our post-construction cleaning services require access to an on-site water supply to run the heated pressure washing and purified water window cleaning systems. In most cases, a standard outdoor faucet is sufficient for the job.

Yes. We coordinate with property managers or building owners to schedule work at appropriate times, prioritize higher-traffic areas first, and set up cones and careful equipment placement to keep disruption to tenants or customers to a minimum throughout the job.

Yes. If a property owner or building management team prefers the work done outside regular operating hours to reduce disruption, we can coordinate a time that fits the site’s schedule.

We follow the cleaning procedures appropriate for each site and work with the property owner when specific environmental requirements apply. For commercial sites where water reclamation or runoff control is needed, we discuss those requirements during the planning stage before any work begins.

We control water pressure carefully around delicate or older window frames, particularly wood-framed windows, and avoid directing water into vulnerable frame areas. That approach protects the window structure while still achieving a thorough clean on the glass and surrounding surfaces.

In some cases, yes. We recommend clearing items that could block access to windows or exterior surfaces, such as furniture, equipment, or decorations near window areas. If heavier items need to be moved, our crew can assist with that when we arrive.

Hard water stains can often be improved significantly, though complete removal depends on how long the staining has been present and how deeply it has set into the glass. When needed, we apply specialized cleaning solutions to lift mineral buildup before completing the purified water rinse, which can greatly improve overall glass clarity.

Yes. We are happy to share guidance on keeping windows and exterior surfaces in good shape after the service. Seasonal or quarterly maintenance is what we generally recommend: regular cleaning prevents buildup from becoming difficult to remove and keeps the property looking its best between major cleaning rounds.

Request a Free Post-Construction Cleaning Quote in Calgary Today!

If you are a builder, property manager, or homeowner finishing a new construction or renovation project in Calgary or the surrounding area, including Okotoks and Heritage Pointe, reach out today for a professional exterior restoration that leaves your property cleaned, polished, and move-in-ready.

Our work is fully insured, our scheduling is reliable, and we confirm every detail in person before we quote. Call (403) 688-3661 or email us to arrange your on-site assessment and get your property ready for handover.

Pressure Washing and Window Cleaning Calgary

Ready for Cleaner, Brighter Exteriors?
Call Silvertip Wash Co. Today